Individual differences |
Methods | Statistics | Clinical | Educational | Industrial | Professional items | World psychology |
Human thermal comfort is defined by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) as the state of mind that expresses satisfaction with the surrounding environment (ASHRAE Standard 55). Maintaining thermal comfort for occupants of buildings or other enclosures is one of the important goals of heating, ventilating, and air conditioning design engineers.
Thermal comfort is affected by heat conduction, convection, thermal radiation and evaporative heat loss. Thermal comfort is maintained when the heat generated by human metabolism is allowed to dissipate, thus maintaining thermal equilibrium with the surroundings. Any heat gain or loss beyond this generates a sensation of discomfort. It has been long recognised that the sensation of feeling hot or cold is not just dependent on air temperature alone.
Importance of Thermal Comfort Edit
Thermal comfort is very important to many work-related factors. It can affect the distraction levels of the workers, and in turn affect their performance and productivity of their work. Also, thermal discomfort has been know to lead to Sick Building Syndrome symptoms.  The US EPA BASE study found that higher indoor temperatures, even within the recommended thermal comfort range, increased worker symptoms. The occurence of symptoms increased much more with raised indoor temperatures in the winter than in the summer due to the larger difference created between indoor and outdoor temperatures.
Factors determining thermal comfort Edit
Factors determining thermal comfort include:
- Personal factors (health, psychology, sociology & situational factors)
- Air temperature
- Mean radiant temperature
- Air movement / velocity (see wind chill factor)
- Relative humidity (see also perspiration)
- Insulative clothing
- Activity levels.
When measuring metabolism rates, many factors have to be taken into account. Each person has a different metabolism rate, and these rates can fluctuate when a person is performing certain activities, or under certain environmental conditions. Even people who are in the same room can feel significant temperature differences due to their metabolic rates, which makes it very hard to find a optimal temperature for everyone in a given location.  
During cold weather, layers of insulating clothing can help keep a person warm. At the same time, if the person is doing a large amount of physical activity, lots of clothing layers can prevent heat loss and possibly lead to overheating. Generally, the thicker the garment is the greater insulating abilities it has. Depending on the type of material the clothing is made out of, air movement and relative humidity can decrease the insulating ability of the material.  
The amount of clothing is measured against a standard amount that is roughly equivalent to a typical business suit, shirt, and undergarments. Activity level is compared to being seated quietly, such as in a classroom. This standard amount of insulation required to keep a resting person warm in a windless room at 70 °F (21.1 °C) is equal to one Clo. Clo units can be converted to R-value in SI units (K/(W/m²) or RSI) by multiplying Clo by 0.155 (1 Clo = 0.155 RSI). (In imperial units 1 Clo corresponds to an R-value of 0.88 °F ft²hr/Btu.)
The human body has sensors that are fairly efficient in detecting temperatures, but they are not very effective in detecting the amount of relative humidity. High or low amounts of relative humidity can make the indoor environment feel extremely dry or extremely thick. This can then play a part in the temperature that a person feels and their thermal comfort. The recommended level of indoor humidity is in the range of 30-60%. 
A way to measure the amount of relative humidity in the air is to use a system of dry-bulb and wet-bulb thermometers. A dry bulb thermometer measures the temperature not relative to moisture. This is generally the temperature reading that we use when looking at weather forecasts. In contrast, the wet bulb has a wet cloth wrapped around it, so the reading on the thermometer takes into account water evaporation in the air. The web bulb reading is always lower than the dry bulb reading. The difference of these two temperatures can be used to calculate the relative humidity. The larger the temperature readings between the two thermometers, the lower the level of relative humidity.  
The wettedness of skin in different areas also affects thermal comfort levels. Humidity can increase wetness on different areas of the body and lead to discomfort. This is usually localized in different parts of the body and local thermal comfort limits for local skin wettedness differ between different skin locations of the body. The extremities are much more sensitive to thermal discomfort from wetness than the trunk of the body. Although local thermal discomfort can be caused from wetness, the thermal comfort of the whole body will not be affected by the wetness of certain parts.
Recently, the effects of low relative humidity and high air velocity were tested on humans after bathing. It was found that the low relative humidity caused thermal discomfort as well as dryness and itching. It is recommended to keep relative humidity levels higher in a bathroom than other rooms in the house for optimal conditions.
Thermal stress Edit
The concept of thermal comfort is closely related to thermal stress. This attempts to predict the impact of solar radiation, air movement, and humidity for military personnel undergoing training exercises or athletes during competitive events. Values are expressed as the Wet Bulb Globe Temperature or Discomfort Index. Generally, humans do not perform well under thermal stress. People’s performances under thermal stress is about 11% lower than their performance at normal thermal conditions. Also, human performance in relation to thermal stress varies greatly by the type of task you are completing. Some of the physiological effects of thermal heat stress include increased blood flow to the skin, sweating, and increased ventilation.  
Effects of Natural Ventilation of Thermal ComfortEdit
Many buildings use a HVAC (Heating Ventilation Air Conditioning) unit to control their thermal environment. Recently, with the current energy and financial situation, new methods for indoor temperature control are being used. One of these is natural ventilation. This process can make the controlled indoor air temperature more susceptible to the outdoor weather, and during the seasonal months the temperatures inside can become too extreme. During the summer months, the temperature inside can rise too high and cause the need for open windows and fans to be used. In contrast, the winter months could call for more insulation and layered clothing to deal with the less than ideal temperatures. 
Operative temperature Edit
The ideal standard for thermal comfort can be defined by the operative temperature. This is the average of the air dry-bulb temperature and of the mean radiant temperature at the given place in a room. In addition, there should be low air velocities and no 'drafts,' little variation in the radiant temperatures from different directions in the room, and humidity within a comfortable range.
The operative temperature intervals varied by the type of indoor location. They also vary by the time of year.  ASHRAE has listings for suggested temperatures and air flow rates in different types of buildings and different environmental circumstances. For example, a single office in a building has a occupancy ration per meter squared of 0.1. In the summer the suggested temperature is between 23.5 and 25.5 degrees C, and airflow velocity of .18 m/s. In the winter, the recommended temperature is between 21.0 and 23.0 degrees C with an airflow velocity of 0.15 m/s. 
Thermal Sensitivity of Individuals Edit
The thermal sensitivity of an individual is quantified by the descriptor FS, which takes on higher values for individuals with lower tolerance to non-ideal thermal conditions. This group includes pregnant women, the disabled, as well as individuals whose age is below 14 or above 60, which is considered the adult range. Existing literature provides consistent evidence that sensitivity to hot and cold surfaces declines with age and that there is also a gradual reduction in the effectiveness of the body in thermoregularion after the age of 60. This is mainly due to a more sluggish response of the counterraction mechanisms in the body that are used to maintain the core temperature of the body at ideal values.
Situational factors include the health, psychological. sociological and vocational activities of the persons. Restaurant employees often have the air-conditioner temperature to suit themselves, rather than the resting clients or incoming new customers from the temperature outside the building.
Gender Differences Edit
While thermal comfort preferences between genders seems to be small, there are some differences. Females are much more likely to be sensitive to thermal conditions. Females are also more likely to be uncomfortable with the room temperature, and will find the temperature too hot or too cold before many men would. Many times, females will prefer higher temperatures. But while females were more sensitive to temperatures, males tend to be more sensitive to relative humidity levels.  
Models of Thermal ComfortEdit
When discussing thermal comfort, there are two different models that can be used. These are the static model and the adaptive model.
The adaptive model sates that there is an optimal temperature for a given indoor environment depending on the outdoor air temperature. It takes into account that humans can adapt and tolerate different temperatures during different times of the year. The optimal temperature for a given time is determined by looking at the mean outdoor temperatures of each month of the year. Also, field studies are performed in these areas to see what the majority of people would prefer as their set-point temperature indoors at different times of the year.
On the other side, the static model states that the indoor temperature should not change as the seasons do. Rather, there should be one set temperature year-round. This is taking a more passive stand that humans do not have to adapt to different temperatures since it will always be constant. 
Thermal Comfort in Different Regions Edit
In different areas of the world, thermal comfort needs may vary based on climate. In China there are hot humid summers and cold winters causing a need for efficient thermal comfort. Energy conservation in relation to thermal comfort has become a large issue in China in the last several decades due to rapid economic and population growth. Researchers are now looking into ways to heat and cool buildings in China for lower costs and also with less harm to the environment.
In tropical areas of Brazil, urbanization is causing a phenomenon called urban heat islands (UHI). These are urban areas, which have risen over the thermal comfort limits due to a large influx of people and only drop within the comfortable range during the rainy season. UHI's are caused by surface and atmospheric modifications from the overcrowding of people in an already hot climate.
In the hot humid region of Saudi Arabia, the issue of thermal comfort has been important in mosques where people go to pray. They are very large open buildings which are used only intermittently making it hard to ventilate them properly. The large size requires a large amount of ventilation but this requires a lot of energy since the buildings are used only for short periods of time. Some mosques have the issue of being too cold from their HVAC systems running for too long and others remain too hot. The stack effect also comes into play due to their large size and creates a large layer of hot air above the people in the mosque. New designs have placed the ventilation systems lower in the buildings to provide more temperature control at ground level. Also new monitoring steps are being taken to improve the efficiency.
Thermal Comfort of Animals Edit
Although thermal comfort of humans is the main focus of thermal comfort studies, the needs of livestock must be met as well for better living and production. The Department of Animal Production in Italy produced a study on ewes, which tested rumen function and diet digestibility of ewes chronically exposed to a hot environment. These two bodily functions were reduced by the hot temperatures offering insight that thermal comfort levels are important to livestock productivity.
These factors were explored experimentally in the 1970s. Many of these studies led to the development and refinement of ASHRAE Standard 55 and were performed at Kansas State University by Ole Fanger and others. Perceived comfort was found to be a complex interaction of these variables. It was found that the majority of individuals would be satisfied by an ideal set of values. As the range of values deviated progressively from the ideal, fewer and fewer people were satisfied. This observation could be expressed statistically as the % of individual who expressed satisfaction by comfort conditions and the predicted mean vote (PMV)
This research is applied to create Building Energy Simulation (BES) programs for residential buildings. Residential buildings can vary much more in thermal comfort than public and commercial buildings. This is due to their smaller size, the variations in clothing worn, and different uses of each room. The main rooms of concern are bathrooms and bedrooms. Bathrooms need to be at a temperature comfortable for a human with or without clothing. Bedrooms are of importance because they need to accommodate different levels of clothing and also different metabolic rates of people asleep or awake.
Thermal comfort research in clothing is currently being done by the military. New air-ventilated garments are being researched to improve evaporative cooling in military settings. Some models are being created and tested based on the amount of cooling they provide.
- P. Ole Fanger
- Room air distribution
- Air conditioning
- Building insulation
- Mahoney tables
- ↑ Welcome To Home Energy Magazine Online
- ↑ 1. Fang, L., Wyon, D. P., Clausen, G., & Fanger, P. O. (2004). Impact of indoor air temperature and humidity in an office on perceived air quality, SBS symptoms and performance. Indoor Air, 14, 74-81.
- ↑ Myhren, J. A., & Holmberg, S. (2008). Flow patterns and thermal comfort in a room with panel, floor and wall heating. Energy and Buildings, 40(4), 524-536.
- ↑ Mendell, M.J., Mirer, A.G. (2009). Indoor Thermal Factors and Symptoms in Office Workers: Findings from the US EPA BASE Study. Indoor Air 2009 Mar 13.
- ↑ Toftum, J. (2005). Thermal Comfort Indices. Handbook of Human Factors and Ergonomics Methods, 63.CRC Press, Boca Raton Fl.
- ↑ Smolander, J. (2002). Effect of cold exposure on older humans. International Journal of Sports Medicine, 23(2), 86.
- ↑ Havenith, G. (1999). Heat balance when wearing protective clothing. The Annals of Occupational Hygiene, 43(5), 289.
- ↑ McCullough, , Eckels, , & Harms, . (2009). Determining temperature ratings for children's cold weather clothing.
- ↑ Balaras, , & BALARAS, . (2007). HVAC and indoor thermal conditions in hospital operating rooms. Energy and Buildings, 39(4), 454.
- ↑ Wolkoff, P., & Kjaergaard, S. K. (2007). The dichotomy of relative humidity on indoor air quality. Environment International, 33(6), 850.
- ↑ Montanini, R. (2007). Wavelength-encoded optical psychrometer for relative humidity measurement. Review of Scientific Instruments, 78(2), 025103.
- ↑ Toida, , & TOIDA, . (2006). A method for measuring dry-bulb temperatures during the operation of a fog system for greenhouse cooling. Biosystems Engineering, 93(3), 347.
- ↑ Fukazawa, T., Havenith, G. (2009). Differences in Comfort Perception in Relation to Local and Whole Body Skin Wettedness. European Journal of Applied Physiology 106(1) 15-24.
- ↑ Hashiguchi, N., Tochihara, Y., (2009). Effects of Low Humidity and High Air Velocity in a Heated Room on Physiological Responses and Thermal Comfort After Bathing: An Experimental Study. International Journal of Nursing Studies 46(2) 172-179.
- ↑ http://www.jstage.jst.go.jp/article/indhealth/44/3/388/_pdf
- ↑ About the WBGT and Apparent Temperature Indices
- ↑ Hancock, P. A., Ross, J. M., & Szalma, J. L. (2007). A meta-analysis of performance response under thermal stressors. Human Factors, 49(5), 851.
- ↑ Leon, L. R. (2008). Thermoregulatory responses to environmental toxicants: The interaction of thermal stress and toxicant exposure. Toxicology and Applied Pharmacology, 233(1), 146.
- ↑ Fordham, . (2000). Natural ventilation. Renewable Energy, 19(1-2), 17.
- ↑ Omer, , & OMER, . (2008). Renewable building energy systems and passive human comfort solutions. Renewable Sustainable Energy Reviews, 12(6), 1562.
- ↑ de Dear, R. (2004). Thermal comfort in practice. Indoor Air, 14 Suppl 7, 32.
- ↑ 2Olesen, B. W. (2004). International standards for the indoor environment. Indoor Air, 14 Suppl 7, 18.
- ↑ Lenzuni, P., Freda, D., & Del Guadio, M. (2008). Classification of Thermal Environments for Comfort Assessment. The Annals of Occupational Hygiene doi:10.1093/annhyg/mep012.
- ↑ Lenzuni, P., Freda, D., & Del Guadio, M. (2008). Classification of Thermal Environments for Comfort Assessment. The Annals of Occupational Hygiene doi:10.1093/annhyg/mep012.
- ↑ Karjalalainen, S. (2007). Gender Differences in Thermal Comfort and use of thermostats in everyday thermal environments. Building and Environment, 42(1594-1603).
- ↑ Lan, L., Lian, Z., Liu, W., & Liu, Y. (2008). Investigation of gender difference in thermal comfort for chinese people. European Journal of Applied Physiology, 102(4), 471.
- ↑ Moujalled, B., Cantin, R., & Guarracino, G. (2008). Comparison of thermal comfort algorithms in naturally ventilated office buildings. Energy and Buildings, 40(12), 2215-2223.
- ↑ Ye, X. J., Zhou, Z. P., Lian, Z. W., Liu, H. M., Li, C. Z., & Liu, Y. M. (2006). Field study of a thermal environment and adaptive model in shanghai. Indoor Air, 16(4), 320-326.
- ↑ Yu, J., Changzhi, Y. (2009). Evaluation on energy and Thermal Performance for Residential Envelopes in Hot Summer and Cold Winter Zone of China. Applied Energy 86(10) 1970-1985.
- ↑ da Silva, V.D., de Azevedo, P.V. (2009). Evaluating the Urban Climate of a Typically Tropical City of Northeastern Brazil. Environ Monit Assess 2009 Jan 30. doi: 10.1007/s10661-008-0726-3.
- ↑ Al-Homoud, M., Abdou, A., Budaiwi, I. (2009). Assessment of Monitored Energy Use and Thermal Comfort Conditions in Mosques in Hot-Humid Climates. Energy and Buildings 41(6) 607-614.
- ↑ Bernabucci, U., Lacetera, N., (2009). Influence of Different Periods of Exposure to Hot Environment on Rumen Function and Diet Digestibility in Sheep. Int J Biometeorol 2009 Apr 16.
- ↑ Peeters, L., (2008). Thermal Comfort in Residential Buildings: Comfort Values and Scales for Building Energy SimulationItalic text'. Applied Energy 86(5) 772-780.
- ↑ Barwood, M.J., Newton, P.S., Tipton, M.J. (2009). Ventilated Vest and Tolerance for Intermittent Exercise in Hot, Dry Conditions with Military Clothing. Aviat Space Environ Med 80(4) 353-359.
- Thermal Comfort, P. O. Fanger, McGraw-Hill, New York, 1970.
- Thermal Comfort chapter, Fundamentals volume of the ASHRAE Handbook, ASHRAE, Inc., Atlanta, GA, 2005.
- Weiss, Hal (1998). Secrets of Warmth: For Comfort or Survival, Seattle, WA: Mountaineers Books.
- Godish, Thad. Indoor Environmental Quality. Boca Raton: CRC Press, 2001.
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|