Methods | Statistics | Clinical | Educational | Industrial | Professional items | World psychology |
A refreshable Braille display or Braille terminal is a form of tacual display an electro-mechanical device for displaying Braille characters, usually by means of raising dots through holes in a flat surface. Blind computer users, who cannot use a normal computer monitor, use it to read text output. Speech synthesizers are also commonly used for the same task, and a blind user may switch between the two systems or use both at the same time depending on circumstances.
Because of the complexity of producing a reliable display that will cope with daily wear and tear, these displays are expensive. Usually, only 40 or 80 Braille cells are displayed. Models with 18-40 cells exist in some notetaker devices.
On some models the position of the cursor is represented by vibrating the dots, and some models have a switch associated with each cell to move the cursor to that cell directly.
The mechanism which raises the dots uses the piezo effect of some crystals, where they expand when a voltage is applied to them. Such a crystal is connected to a lever, which in turn raises the dot. There has to be a crystal for each dot of the display, i.e. eight per character.
The software that controls the display is called a screen reader. It gathers the content of the screen from the operating system, converts it into braille characters and sends it to the display. Screen readers for graphical operating systems are especially complex, because graphical elements like windows or slidebars have to be interpreted and described in text form. Modern operating systems usually have an Application Programming Interface to help screen readers obtain this information, such as MSAA for Microsoft Windows or AT-SPI for GNOME.
A new development, called the rotating-wheel Braille display, was developed in 2000 by the National Institute of Standards and Technology (NIST) and although a second rotating display was designed at the Leuven University in Belgium both wheels are still in the process of commercialization. Braille dots are put on the edge of a spinning wheel, which allows the user to read continuously with a stationary finger while the wheel spins at a selected speed. The Braille dots are set in a simple scanning-style fashion as the dots on the wheel spins past a stationary actuator that sets the Braille characters. As a result, manufacturing complexity is greatly reduced and rotating-wheel Braille displays, when in actual production, should be less expensive than traditional Braille displays.
The base of a refreshable braille display is a pure braille terminal. There, the input is performed by two sets of three keys plus a space bar (as in the Perkins Brailler), while output is via a refreshable braille display consisting of a row of electromechanical character cells, each of which can raise or lower a combination of six (or in some cases, eight) round-tipped pins. Other variants exist that use a conventional QWERTY keyboard for input and braille pins for output, as well as input-only and output-only devices. In 1951, David Abraham, a woodworking teacher at Perkins, created a portable braille terminal.
Braille computer monitorEdit
The Braille computer monitor has rows and columns of rectangular cells. The cells include four rows and two columns of dots that can be felt for interpretation by the user. "The pins are driven by electromechanical impact drivers and are held in position by resilient elastomeric cords. The impact drivers are carried on a bi-directional printhead which travels beneath the movable pins. An erasing mechanism is provided to positively drive the pins downwardly to erase the characters produced by the printhead." The Braille computer monitor is under the United States Patent 6700553.
- NIST: Converting Digital Information to Braille
- Information on Bi-directional Refreshable Tactile Display
- Tips on buying a braille display
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|