Least squares
Redirected from Ordinary least squares
this wiki
Assessment |
Biopsychology |
Comparative |
Cognitive |
Developmental |
Language |
Individual differences |
Personality |
Philosophy |
Social |
Methods |
Statistics |
Clinical |
Educational |
Industrial |
Professional items |
World psychology |
Statistics: Scientific method · Research methods · Experimental design · Undergraduate statistics courses · Statistical tests · Game theory · Decision theory
In regression analysis, least squares, also known as ordinary least squares analysis, is a method for linear regression that determines the values of unknown quantities in a statistical model by minimizing the sum of the squared residuals (the difference between the predicted and observed values). This method was first described by Carl Friedrich Gauss around 1794.^{[1]} Today, this method is available in most statistical software packages. The least-squares approach to regression analysis has been shown to be optimal in the sense that it satisfies the Gauss-Markov theorem.
A related method is the least mean squares (LMS) method. It occurs when the number of measured data is 1 and the gradient descent method is used to minimize the squared residual. LMS is known to minimize the expectation of the squared residual, with the smallest number of operations per iteration). However, it requires a large number of iterations to converge.
Many other types of optimization problems can be expressed in a least squares form, by either minimizing energy or maximizing entropy.
HistoryEdit
ContextEdit
The method of least squares grew out of the fields of astronomy and geodesy as scientists and mathematicians sought to provide solutions to the challenges of navigating the Earth's oceans during the Age of Exploration. The accurate description of the behavior of celestial bodies was key to enabling ships to sail in open seas where before sailors had to rely on land sightings to determine the positions of their ships.
The method was the culmination of several advances that took place during the course of the eighteenth century^{[2]}:
- The combination of different observations taken under the same conditions as opposed to simply trying one's best to observe and record a single observation accurately. This approach was notably used by Tobias Mayer while studying the librations of the moon.
- The combination of different observations as being the best estimate of the true value; errors decrease with aggregation rather than increase, perhaps first expressed by Roger Cotes.
- The combination of different observations taken under different conditions as notably performed by Roger Joseph Boscovich in his work on the shape of the earth and Pierre-Simon Laplace in his work in explaining the differences in motion of Jupiter and Saturn.
- The development of a criterion that can be evaluated to determine when the solution with the minimum error has been achieved, developed by Laplace in his Method of Situation.
The method itselfEdit
Carl Friedrich Gauss is credited with developing the fundamentals of the basis for least-squares analysis in 1795 at the age of eighteen.
An early demonstration of the strength of Gauss's method came when it was used to predict the future location of the newly discovered asteroid Ceres. On January 1st, 1801, the Italian astronomer Giuseppe Piazzi discovered Ceres and was able to track its path for 40 days before it was lost in the glare of the sun. Based on this data, it was desired to determine the location of Ceres after it emerged from behind the sun without solving the complicated Kepler's nonlinear equations of planetary motion. The only predictions that successfully allowed Hungarian astronomer Franz Xaver von Zach to relocate Ceres were those performed by the 24-year-old Gauss using least-squares analysis.
Gauss did not publish the method until 1809, when it appeared in volume two of his work on celestial mechanics, Theoria Motus Corporum Coelestium in sectionibus conicis solem ambientium. In 1829, Gauss was able to state that the least-squares approach to regression analysis is optimal in the sense that in a linear model where the errors have a mean of zero, are uncorrelated, and have equal variances, the best linear unbiased estimators of the coefficients is the least-squares estimators. This result is known as the Gauss-Markov theorem.
The idea of least-squares analysis was also independently formulated by the Frenchman Adrien-Marie Legendre in 1805 and the American Robert Adrain in 1808.
Problem statementEdit
The objective consists of adjusting a model function to best fit a data set. The chosen model function has adjustable parameters. The data set consist of n points with . The model function has the form , where is the dependent variable, are the independent variables, and are the model adjustable parameters. We wish to find the parameter values such that the model best fits the data according to a defined error criterion. The least sum square method minimizes the sum square error equation with respect to the adjustable parameters .
For an example, the data is height measurements over a surface. We choose to model the data by a plane with parameters for plane mean height, plane tip angle, and plane tilt angle. The model equation is then , the independent variables are , and the adjustable parameters are .
Solving the least squares problemEdit
Least square optimization problems can be divided into linear and non-linear problems. The linear problem has a closed form solution. The optimization problem is said to be a linear optimization problem if the first order partial derivatives of S with respect to the parameters results in a set of equations that is linear in the parameter variables. The general, non-linear, unconstrained optimization problem has no closed form solution. In this case recursive methods, such as Newton's method, combined with the gradient descent method, or specialized methods for least squares analysis, such as the Gauss-Newton algorithm or the Levenberg-Marquardt algorithm can be used.
Least squares and regression analysisEdit
In regression analysis, one replaces the relation
by
where the noise term ε is a random variable with mean zero. Note that we are assuming that the values are exact, and all the errors are in the values. Again, we distinguish between linear regression, in which case the function f is linear in the parameters to be determined (e.g., f(x) = ax^{2} + bx + c), and nonlinear regression. As before, linear regression is much simpler than nonlinear regression. (It is tempting to think that the reason for the name linear regression is that the graph of the function f(x) = ax + b is a line. But fitting a curve like f(x) = ax^{2} + bx + c when estimating a, b, and c by least squares, is an instance of linear regression because the vector of least-square estimates of a, b, and c is a linear transformation of the vector whose components are f(x_{i}) + ε_{i}.
Parameter estimatesEdit
By recognizing that the regression model is a system of linear equations we can express the model using data matrix X, target vector Y and parameter vector . The ith row of X and Y will contain the x and y value for the ith data sample. Then the model can be written as
which when using pure matrix notation becomes
where ε is normally distributed with expected value 0 (i.e., a column vector of 0s) and variance σ^{2} I_{n}, where I_{n} is the n×n identity matrix.
The least-squares estimator for is
(where X^{T} is the transpose of X) and the sum of squares of residuals is
One of the properties of least-squares is that the matrix is the orthogonal projection of Y onto the column space of X.
The fact that the matrix X(X^{T}X)^{−1}X^{T} is a symmetric idempotent matrix is incessantly relied on in proofs of theorems. The linearity of as a function of the vector Y, expressed above by saying
is the reason why this is called "linear" regression. Nonlinear regression uses nonlinear methods of estimation.
The matrix I_{n} − X (X^{T} X)^{−1} X^{T} that appears above is a symmetric idempotent matrix of rank n − 2. Here is an example of the use of that fact in the theory of linear regression. The finite-dimensional spectral theorem of linear algebra says that any real symmetric matrix M can be diagonalized by an orthogonal matrix G, i.e., the matrix G′MG is a diagonal matrix. If the matrix M is also idempotent, then the diagonal entries in G′MG must be idempotent numbers. Only two real numbers are idempotent: 0 and 1. So I_{n} − X(X^{T}X)^{ -1}X^{T}, after diagonalization, has n − 2 1s and two 0s on the diagonal. That is most of the work in showing that the sum of squares of residuals has a chi-square distribution with n−2 degrees of freedom.
Regression parameters can also be estimated by Bayesian methods. This has the advantages that
- confidence intervals can be produced for parameter estimates without the use of asymptotic approximations,
- prior information can be incorporated into the analysis.
Suppose that in the linear regression
we know from domain knowledge that alpha can only take one of the values {−1, +1} but we do not know which. We can build this information into the analysis by choosing a prior for alpha which is a discrete distribution with a probability of 0.5 on −1 and 0.5 on +1. The posterior for alpha will also be a discrete distribution on {−1, +1}, but the probability weights will change to reflect the evidence from the data.
In modern computer applications, the actual value of is calculated using the QR decomposition or slightly more robust methods when is near singular. The code for the MATLAB backslash function, "\
", is an excellent example of a robust method.
Summarizing the data Edit
We sum the observations, the squares of the Xs and the products XY to obtain the following quantities.
Estimating beta (the slope) Edit
We use the summary statistics above to calculate , the estimate of β.
Estimating alpha (the intercept) Edit
We use the estimate of β and the other statistics to estimate α by:
A consequence of this estimate is that the regression line will always pass through the "center" .
LimitationsEdit
Least squares estimation for linear models is notoriously non-robust to outliers. If the distribution of the outliers is skewed, the estimates can be biased. In the presence of any outliers, the least squares estimates are inefficient and can be extremely slow. When outliers occur in the data, methods of robust regression are more appropriate.
ReferencesEdit
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2007) |
See alsoEdit
- Error of measurement
- Isotonic regression
- Least mean squares filter
- Least-squares estimation of linear regression coefficients
- Linear least squares
- Linear regression
- Segmented regression
- Measurement uncertainty
- Moving least squares
- Numerical smoothing and differentiation
- Recursive least squares
- Regression analysis
- Robust regression
- Root mean square
- Statistical regression
- Total least squares or errors-in-variables model
- Weighted least squares
External linksEdit
- MIT Linear Algebra Lecture on Least Squares at Google Video, from MIT OpenCourseWare
- http://www.physics.csbsju.edu/stats/least_squares.html
- Zunzun.com - Online curve and surface fitting
- http://www.orbitals.com/self/least/least.htm
- Eric W. Weisstein, Least Squares Fitting Polynomial at MathWorld.
- Module for Least Squares Polynomials
- Least squares on PlanetMath
- Derivation of quadratic least squares
- xuru.org Online least squares and regression tools
This page uses Creative Commons Licensed content from Wikipedia (view authors). |