Assessment |
Biopsychology |
Comparative |
Cognitive |
Developmental |
Language |
Individual differences |
Personality |
Philosophy |
Social |
Methods |
Statistics |
Clinical |
Educational |
Industrial |
Professional items |
World psychology |
Biological: Behavioural genetics · Evolutionary psychology · Neuroanatomy · Neurochemistry · Neuroendocrinology · Neuroscience · Psychoneuroimmunology · Physiological Psychology · Psychopharmacology (Index, Outline)
A lens is a device that causes light to either converge and concentrate or to diverge. It is usually formed from a piece of shaped glass or plastic.
Contents
[show]HistoryEdit
Recent excavations at the Viking harbour town of Fröjel, Gotland in Sweden have revealed rock crystal lenses (the Visby lenses) produced at Fröjel in the 11th to 12th century via turning on pole-lathes that have an imaging quality comparable to that of 1950s aspheric lenses. The Viking lenses concentrate sunlight enough to ignite fires.
Widespread use of lenses did not occur until the use of reading stones in the 11th century and invention of spectacles, probably in Italy in the 1280s. Nicholas of Cusa is believed to have been the first to discover the benefits of concave lenses for the treatment of myopia in 1451.
Lens constructionEdit
Most lenses are spherical lenses: lenses whose surfaces have spherical curvature, that is, the front and back surfaces of the lens can each be imagined to be part of the surface of a sphere. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens; in almost all cases the lens axis passes through the physical centre of the lens.
Types of lensesEdit
Lenses are classified by the curvature of the two optical surfaces. A lens is biconvex (also called double convex, or just convex) if both surfaces are convex, likewise, a lens with two concave surfaces is biconcave (or just concave). If one of the surfaces is flat, the lens is plano-convex or plano-concave depending on the curvature of the other surface. A lens with one convex and one concave side is convex-concave, and in this case if both curvatures are equal it is a meniscus lens. (Sometimes, meniscus lens can refer to any lens of the convex-concave type).
If the lens is biconvex or plano-convex, a collimated or parallel beam of light travelling parallel to the lens axis and passing through the lens will be converged (or focused) to a spot on the axis, at a certain distance behind the lens (known as the focal length). In this case, the lens is called a positive or converging lens.
If the lens is biconcave or plano-concave, a collimated beam of light passing through the lens is diverged (spread); the lens is thus called a negative or diverging lens. The beam after passing through the lens appears to be emanating from a particular point on the axis in front of the lens; the distance from this point to the lens is also known as the focal length, although it is negative with respect to the focal length of a converging lens.
If the lens is convex-concave (a meniscus lens), whether it is converging or diverging depends on the relative curvatures of the two surfaces. If the curvatures are equal, then the beam is neither converged nor diverged.
Lensmaker's equationEdit
The focal length of a lens in air can be calculated from the lensmaker's equation:^{[1]}
where
- is the focal length of the lens,
- is the refractive index of the lens material,
- is the radius of curvature of the lens surface closest to the light source,
- is the radius of curvature of the lens surface farthest from the light source, and
- is the thickness of the lens (the distance along the lens axis between the two surface vertices).
Sign convention of lens radii R_{1} and R_{2}Edit
- Main article: Radius of curvature (optics)
The signs of the lens' radii of curvature indicate whether the corresponding surfaces are convex or concave. The sign convention used to represent this varies, but in this article if R_{1} is positive the first surface is convex, and if R_{1} is negative the surface is concave. The signs are reversed for the back surface of the lens: if R_{2} is positive the surface is concave, and if R_{2} is negative the surface is convex. If either radius is infinite, the corresponding surface is flat.
Thin lens equationEdit
If d is small compared to R_{1} and R_{2}, then the thin lens approximation can be made. For a lens in air, f is then given by
- ^{[2]}
The focal length f is positive for converging lenses, negative for diverging lenses, and infinite for meniscus lenses. The value 1/f is known as the optical power of the lens, and so meniscus lenses are said to have zero power. Lens power is measured in dioptres, which are units equal to inverse meters (m^{−1}).
Lenses have the same focal length when light travels from the back to the front as when light goes from the front to the back, although other properties of the lens, such as the aberrations are not necessarily the same in both directions.
Imaging propertiesEdit
As mentioned above, a positive or converging lens in air will focus a collimated beam travelling along the lens axis to a spot (known as the focal point) at a distance f from the lens. Conversely, a point source of light placed at the focal point will be converted into a collimated beam by the lens. These two cases are examples of image formation in lenses. In the former case, an object at an infinite distance (as represented by a collimated beam of waves) is focused to an image at the focal point of the lens. In the latter, an object at the focal length distance from the lens is imaged at infinity. The plane perpendicular to the lens axis situated at a distance f from the lens is called the focal plane.
If the distances from the object to the lens and from the lens to the image are S_{1} and S_{2} respectively, for a lens of negligible thickness, in air, the distances are related by the thin lens formula:
- .
What this means is that, if an object is placed at a distance S_{1} along the axis in front of a positive lens of focal length f, a screen placed at a distance S_{2} behind the lens will have an image of the object projected onto it, as long as S_{1} > f. This is the principle behind photography. The image in this case is known as a real image.
Note that if S_{1} < f, S_{2} becomes negative, the image is apparently positioned on the same side of the lens as the object. Although this kind of image, known as a virtual image, cannot be projected on a screen, an observer looking through the lens will see the image in its apparent calculated position. A magnifying glass creates this kind of image.
The magnification of the lens is given by:
- ,
where M is the magnification factor; if |M|>1, the image is larger than the object. Notice the sign convention here shows that, if M is negative, as it is for real images, the image is upside-down with respect to the object. For virtual images, M is positive and the image is upright.
In the special case that S_{1} = ∞, then S_{2} = f and M = −f / ∞ = 0. This corresponds to a collimated beam being focused to a single spot at the focal point. The size of the image in this case is not actually zero, since diffraction effects place a lower limit on the size of the image (see Rayleigh criterion).
The formulas above may also be used for negative (diverging) lens by using a negative focal length (f), but for these lenses only virtual images can be formed.
For the case of lenses that are not thin, or for more complicated multi-lens optical systems, the same formulas can be used, but S_{1} and S_{2} are interpreted differently. If the system is in air or vacuum, S_{1} and S_{2} are measured from the front and rear principal planes of the system, respectively. Imaging in media with an index of refraction greater than 1 is more complicated, and is beyond the scope of this article.
Uses of lenses Edit
One important use of lenses is as a prosthetic for the correction of visual impairments such as myopia, hyperopia, presbyopia, and astigmatism. See corrective lens, contact lens, eyeglasses.
Another use is in imaging systems such as a monocular, binoculars, telescope, spotting scope, telescopic gun sight, theodolite, microscope, and camera (photographic lens). A single convex lens mounted in a frame with a handle or stand is a magnifying glass.
Large convex lenses have been used for hundreds of years to light fires by concentrating sunlight. In this use they are commonly called burning-glasses. Such a lens does not need to be optically accurate to work satisfactorily. A modern variation of this is the use of a lens in combination with a photovoltaic cell to concentrate sunlight and improve the efficiency of the device.
Radio astronomy and radar systems often use dielectric lenses, commonly called a lens antenna to refract electromagnetic radiation into a collector antenna. The Square Kilometre Array radio telescope will employ such lenses to get a collection area nearly 30 times greater than what is currently the largest antenna ever built.
AberrationsEdit
- Main article: Aberration in optical systems
Lenses do not form perfect images, and there is always some degree of distortion or aberration introduced by the lens which causes the image to be an imperfect replica of the object. Careful design of the lens system for a particular application ensures that the aberration is minimized. There are several different types of aberration which can affect image quality.
Spherical aberrationEdit
Spherical aberration occurs because spherical surfaces are not the ideal shape with which to make a lens, but they are by far the simplest shape to which glass can be ground and polished and so are often used. Spherical aberration causes beams parallel to but away from the lens axis to be focused in a slightly different place than beams close to the axis. This manifests itself as a blurring of the image. Lenses in which closer-to-ideal, non-spherical surfaces are used are called aspheric lenses. These were formerly complex to make and often extremely expensive, although advances in technology have greatly reduced the cost of manufacture for these lenses. Spherical aberration can be minimised by careful choice of the curvature of the surfaces for a particular application: for instance, a plano-convex lens which is used to focus a collimated beam produces a sharper focal spot when used with the convex side towards the beam.
ComaEdit
Another type of aberration is coma, which derives its name from the comet-like appearance of the aberrated image. Coma occurs when an object off the optical axis of the lens is imaged, where rays pass through the lens at an angle to the axis θ. Rays which pass through the centre of the lens of focal length f are focused at a point with distance f tan θ from the axis. Rays passing through the outer margins of the lens are focused at different points, either further from the axis (positive coma) or closer to the axis (negative coma). In general, a bundle of parallel rays passing through the lens at a fixed distance from the centre of the lens are focused to a ring-shaped image in the focal plane, known as a comatic circle. The sum of all these circles results in a V-shaped or comet-like flare. As with spherical aberration, coma can be minimised (and in some cases eliminated) by choosing the curvature of the two lens surfaces to match the application. Lenses in which both spherical aberration and coma are minimised are called bestform lenses.
Chromatic aberrationEdit
Chromatic aberration is caused by the dispersion of the lens material, the variation of its refractive index n with the wavelength of light. Since from the formulae above f is dependent on n, it follows that different wavelengths of light will be focused to different positions. Chromatic aberration of a lens is seen as fringes of colour around the image. It can be minimised by using an achromatic doublet (or achromat) in which two materials with differing dispersion are bonded together to form a single lens. This reduces the amount of chromatic aberration over a certain range of wavelengths, though it does not produce perfect correction. The use of achromats was an important step in the development of the optical microscope. An apochromat is a lens or lens system which has even better correction of chromatic aberration, combined with improved correction of spherical aberration. Apochromats are much more expensive than achromats.
Other kinds of aberration include field curvature, barrel and pincushion distortion, and astigmatism.
Aperture diffractionEdit
Even if a lens is designed to minimize or eliminate the aberrations described above, the image quality is still limited by the diffraction of light passing through the lens' finite aperture. A diffraction-limited lens is one in which aberrations have been reduced to the point where the image quality is primarily limited by diffraction under the design conditions.
Multiple lensesEdit
Lenses may be combined to form more complex optical systems. The simplest case is when lenses are placed in contact: if the lenses of focal lengths f_{1} and f_{2} are "thin", the combined focal length f of the lenses can be calculated from:
- .
Since 1/f is the power of a lens, it can be seen that the powers of thin lenses in contact are additive.
If two thin lenses are separated by some distance d, the distance from the second lens to the focal point of the combined lenses is called the back focal length (BFL). This is given by:
- .
Note that as d tends to zero, the value of the BFL tends to the value of f given for thin lenses in contact.
If the separation distance is equal to the sum of the focal lengths (d = f_{1}+f_{2}), the BFL is infinite. This corresponds to a pair of lenses that transform a parallel (collimated) beam into another collimated beam. This type of system is called afocal, since it produces no net convergence or divergence of the beam. Two lenses at this separation form the simplest type of optical telescope.
Although the system does not alter the divergence of a collimated beam, it does alter the width of the beam. The magnification of the telescope is given by:
- ,
which is the ratio of the input beam width to the output beam width. Note the sign convention; a telescope with two convex lenses (f_{1} > 0, f_{2} > 0) produce a negative magnification, indicating an inverted image. A convex plus a concave lens (f_{1} > 0 > f_{2}) produces a positive magnification and the image is upright.
See also Edit
- Aberration in optical systems
- Axicon
- Back focal plane
- Bokeh
- Corrective lens
- Eyepiece
- F-number
- Fresnel lens
- Gradient index lens
- Gravitational lens
- History of lensmaking
- Lens (anatomy)
- Microscope
- Numerical aperture
- Optical coatings
- Optical lens design
- Photochromic lens
- Photographic lens
- Prime lens
- Prism (optics)
- Superlens
- Telescope
- Zoom lens
ReferencesEdit
GeneralEdit
- Hecht, Eugene (1987). Optics, 2nd ed., Addison Wesley. ISBN 0-201-11609-X. Chapters 5 & 6.
- Greivenkamp, John E. (2004). Field Guide to Geometrical Optics, SPIE Field Guides vol. FG01, SPIE. ISBN 0-8194-5294-7.
FootnotesEdit
External links Edit
- History of Optics (audio mp3) by Simon Schaffer, Professor in History and Philosophy of Science at the University of Cambridge, Jim Bennett, Director of the Museum of the History of Science at the University of Oxford and Emily Winterburn, Curator of Astronomy at the National Maritime Museum (recorded by the BBC).
- a chapter from an online textbook on refraction and lenses
- Thin Spherical Lenses on Project PHYSNET.
- Lens article at digitalartform.com
- Thin Lens Java applet
- Article on Ancient Egyptian lenses
- picture of the Ninive rock crystal lens
- Learning by Simulations - Concave and Convex Lenses
This page uses Creative Commons Licensed content from Wikipedia (view authors). |