# Kendall tau rank correlation coefficient

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
34,196pages on
this wiki

In statistics, the Kendall rank correlation coefficient, commonly referred to as Kendall's tau (τ) coefficient, is a statistic used to measure the association between two measured quantities. A tau test is a non-parametric hypothesis test which uses the coefficient to test for statistical dependence.

Specifically, it is a measure of rank correlation: that is, the similarity of the orderings of the data when ranked by each of the quantities. It is named after Maurice Kendall, who developed it in 1938,[1] though Gustav Fechner had proposed a similar measure in the context of time series in 1897.[2]

## DefinitionEdit

Let (x1y1), (x2y2), …, (xnyn) be a set of joint observations from two random variables X and Y respectively, such that all the values of (xi) and (yi) are unique. Any pair of observations (xiyi) and (xjyj) are said to be concordant if the ranks for both elements agree: that is, if both xi > xj and yi > yj or if both xi < xj and yi < yj. They are said to be discordant, if xi > xj and yi < yj or if xi < xj and yi > yj. If xi = xj or yi = yj, the pair is neither concordant nor discordant.

The Kendall τ coefficient is defined as:

$\tau = \frac{(\text{number of concordant pairs}) - (\text{number of discordant pairs})}{\frac{1}{2} n (n-1) } .$[3]

### PropertiesEdit

The denominator is the total number of pairs, so the coefficient must be in the range −1 ≤ τ ≤ 1.

• If the agreement between the two rankings is perfect (i.e., the two rankings are the same) the coefficient has value 1.
• If the disagreement between the two rankings is perfect (i.e., one ranking is the reverse of the other) the coefficient has value −1.
• If X and Y are independent, then we would expect the coefficient to be approximately zero.

## Hypothesis testEdit

The Kendall rank coefficient is often used as a test statistic in a statistical hypothesis test to establish whether two variables may be regarded as statistically dependent. This test is non-parametric, as it does not rely on any assumptions on the distributions of X or Y.

Under a null hypothesis of X and Y being independent, the sampling distribution of τ will have an expected value of zero. The precise distribution cannot be characterized in terms of common distributions, but may be calculated exactly for small samples; for larger samples, it is common to use an approximation to the normal distribution, with mean zero and variance

$\frac{2(2n+5)}{9n (n-1)}$.[4]

## Accounting for tiesEdit

A pair {(xiyi), (xjyj)} is said to be tied if xi = xj or yi = yj; a tied pair is neither concordant nor discordant. When tied pairs arise in the data, the coefficient may be modified in a number of ways to keep it in the range [-1, 1]:

### Tau-aEdit

Tau-a statistic tests the strength of association of the cross tabulations. Both variables have to be ordinal. Tau-a will not make any adjustment for ties.

### Tau-bEdit

Tau-b statistic, unlike tau-a, makes adjustments for ties and is suitable for square tables. Values of tau-b range from −1 (100% negative association, or perfect inversion) to +1 (100% positive association, or perfect agreement). A value of zero indicates the absence of association.

The Kendall tau-b coefficient is defined as:

$\tau_B = \frac{n_c-n_d}{\sqrt{(n_0-n_1)(n_0-n_2)}}$

where

$\begin{array}{ccl} n_0 & = & n(n-1)/2\\ n_1 & = & \sum_i t_i (t_i-1)/2 \\ n_2 & = & \sum_j u_j (u_j-1)/2 \\ t_i & = & \mbox{Number of tied values in the } i^{th} \mbox{ group of ties for the first quantity} \\ u_j & = & \mbox{Number of tied values in the } j^{th} \mbox{ group of ties for the second quantity} \end{array}$

### Tau-cEdit

Tau-c differs from tau-b as in being more suitable for rectangular tables than for square tables.

## Significance testsEdit

When two quantities are statistically independent, the distribution of $\tau$ is not easily characterizable in terms of known distributions. However, for $\tau_A$ the following statistic, $z_A$, is approximately characterized by a standard normal distribution when the quantities are statistically independent:

$z_A = {3 (n_c - n_d) \over \sqrt{n(n-1)(2n+5)/2} }$

Thus, if you want to test whether two quantities are statistically dependent, compute $z_A$, and find the cumulative probability for a standard normal distribution at $-|z_A|$. For a 2-tailed test, multiply that number by two and this gives you the p-value. If the p-value is below your acceptance level (typically 5%), you can reject the null hypothesis that the quantities are statistically independent and accept the hypothesis that they are dependent.

Numerous adjustments should be added to $z_A$ when accounting for ties. The following statistic, $z_B$, provides an approximation coinciding with the $\tau_B$ distribution and is again approximately characterized by a standard normal distribution when the quantities are statistically independent:

$z_B = {n_c - n_d \over \sqrt{ v } }$

where

$\begin{array}{ccl} v & = & (v_0 - v_t - v_u)/18 + v_1 + v_2 \\ v_0 & = & n (n-1) (2n+5) \\ v_t & = & \sum_i t_i (t_i-1) (2 t_i+5)\\ v_u & = & \sum_j u_j (u_j-1)(2 u_j+5) \\ v_1 & = & \sum_i t_i (t_i-1) \sum_j u_j (u_j-1) / (2n(n-1)) \\ v_2 & = & \sum_i t_i (t_i-1) (t_i-2) \sum_j u_j (u_j-1) (u_j-2) / (9 n (n-1) (n-2)) \end{array}$

## AlgorithmsEdit

The direct computation of the numerator $n_c - n_d$, involves two nested iterations, as characterized by the following pseudo-code:

numer := 0
for i:=1..N do
for j:=1..(i-1) do
numer := numer + sgn(x[i] - x[j]) * sgn(y[i] - y[j])
return numer


Although quick to implement, this algorithm is $O(n^2)$ in complexity and becomes very slow on large samples. A more sophisticated algorithm[5] built upon the Merge Sort algorithm can be used to compute the numerator in $O(n \cdot \log{n})$ time.

Begin by ordering your data points sorting by the first quantity, $x$, and secondarily (among ties in $x$) by the second quantity, $y$. With this initial ordering, $y$ is not sorted, and the core of the algorithm consists of computing how many steps a Bubble Sort would take to sort this initial $y$. An enhanced Merge Sort algorithm, with $O(n \log n)$ complexity, can be applied to compute the number of swaps, $S(y)$, that would be required by a Bubble Sort to sort $y_i$. Then the numerator for $\tau$ is computed as:

$n_c-n_d = n_0 - n_1 - n_2 + n_3 - 2 S(y)$,

where $n_3$ is computed like $n_1$ and $n_2$, but with respect to the joint ties in $x$ and $y$.

A Merge Sort partitions the data to be sorted, $y$ into two roughly equal halves, $y_{left}$ and $y_{right}$, then sorts each half recursive, and then merges the two sorted halves into a fully sorted vector. The number of Bubble Sort swaps is equal to:

$S(y) = S(y_{left}) + S(y_{right}) + M(Y_{left},Y_{right})$

where $Y_{left}$ and $Y_{right}$ are the sorted versions of $y_{left}$ and $y_{right}$, and $M(\cdot,\cdot)$ characterizes the Bubble Sort swap-equivalent for a merge operation. $M(\cdot,\cdot)$ is computed as depicted in the following pseudo-code:

function M(L[1..n], R[1..m])
n := n + m
i := 1
j := 1
nSwaps := 0
while i + j <= n do
if i > m or R[j] < L[i] then
nSwaps := nSwaps + m - (i-1)
j := j + 1
else
i := i + 1
return nSwaps


A side effect of the above steps is that you end up with both a sorted version of $x$ and a sorted version of $y$. With these, the factors $t_i$ and $u_j$ used to compute $\tau_B$ are easily obtained in a single linear-time pass through the sorted arrays.

A second algorithm with $O(n \cdot \log{n})$ time complexity, based on AVL trees, was devised by David Christensen.[6]

## ReferencesEdit

1. Kendall, M. (1938). A New Measure of Rank Correlation. Biometrika 30 (1–2): 81–89.
2. Kruskal, W.H. (1958). Ordinal Measures of Association. Journal of the American Statistical Association 53 (284): 814–861.
3. Template:SpringerEOM
4. Template:SpringerEOM
5. Knight, W. (1966). A Computer Method for Calculating Kendall's Tau with Ungrouped Data. Journal of the American Statistical Association 61 (314): 436–439.
6. Christensen, David (2005). Fast algorithms for the calculation of Kendall's τ. Computational Statistics 20 (1): 51–62.
• Abdi, H. (2007). Encyclopedia of Measurement and Statistics, Thousand Oaks (CA): Sage.
• Kendall, M. (1948) Rank Correlation Methods, Charles Griffin & Company Limited