Assessment |
Biopsychology |
Comparative |
Cognitive |
Developmental |
Language |
Individual differences |
Personality |
Philosophy |
Social |

Methods |
Statistics |
Clinical |
Educational |
Industrial |
Professional items |
World psychology |

**Biological:**
Behavioural genetics ·
Evolutionary psychology ·
Neuroanatomy ·
Neurochemistry ·
Neuroendocrinology ·
Neuroscience ·
Psychoneuroimmunology ·
Physiological Psychology ·
Psychopharmacology
(Index, Outline)

The **head-related transfer function HRTF**, also called the

**anatomical transfer function**, describes how a given sound wave input (parameterized as frequency and source location) is filtered by the diffraction and reflection properties of the head, pinna, and torso, before the sound reaches the transduction machinery of the eardrum and inner ear (see auditory system). Biologically, the source-location-specific prefiltering effects of these external structures aid in the neural determination of source location, particularly the determination of source elevation.

*ATF*Linear systems analysis defines the transfer function as the complex ratio between the output signal spectrum and the input signal spectrum as a function of frequency. Blauert (1974; cited in Blauert, 1981) initially defined the transfer function as the free-field transfer function *FFTF*. Other terms include free-field to eardrum transfer function and the pressure transformation from the free-field to the eardrum. Less specific descriptions include the pinna transfer function, the outer ear transfer function, the pinna response, directional transfer function *DTF* or what is commonly termed the head-related transfer function *HRTF*.

The transfer function *H*(*f*) of any LTI system at frequency *f* is:

*H*(*f*) = Output (*f*) / Input (*f*)

One method used to obtain the HRTF from a given source location is therefore to measure the **head-related impulse response HRIR **,

*h*(

*t*), at the ear drum for the impulse

*Δ*(

*t*) placed at the source. The

*HRTF*

*H*(

*f*) is the Fourier transform of the

*HRIR*

*h*(

*t*).

Even when measured for a dummy head of idealized geometry, head-related transfer functions are complicated functions of frequency and the three spatial variables. For distances greater than 1 m from the head, however, the *HRTF* can be said to attenuate inversely with range. It is this far field *HRTF*, *H*(*f*, *θ*, *φ*), that is normally measured.

HRTFs are typically measured in an anechoic chamber to minimize the influence of early reflections and reverberation on the measured response. *HRTF*s are measured at small increments of *θ* such as 15° or 30° in the horizontal plane, with interpolation used to synthesize *HRTF*s for arbitrary positions of *θ*. Even with small increments, however, interpolation can lead to front-back confusion, and optimizing the interpolation procedure is an active area of research. Humans are less sensitive to changes in the azimuth, *φ*, and *HRTF*s are often measured only on the horizontal plane or with 45° increments in the median plane.

In order to maximize the signal-to-noise ratio (SNR) in a measured *HRTF*, it is important that the impulse being generated be of high volume. In practice, however, it can be difficult to generate impulses at high volumes and, if generated, they can be damaging to human ears, so it is more common for *HRTF*s to be directly calculated in the frequency domain using a frequency-swept sine wave or by using maximum length sequences. User fatigue is still a problem, however, highlighting the need for the ability to interpolate based on fewer measurements.

## See alsoEdit

This page uses Creative Commons Licensed content from Wikipedia (view authors). |