# Standard electrode potential

## Redirected from Electrode potential

34,200pages on
this wiki

In electrochemistry, the standard electrode potential, abbreviated Eo, is the measure of individual potential of any electrode at standard ambient conditions, which is at a temperature of 298K, solutes at a concentration of 1 M, and gases at a pressure of 1 bar. The basis for an electrochemical cell such as the galvanic cell is always a redox reaction which can be broken down into two half-reactions: oxidation at anode (loss of electron) and reduction at cathode (gain of electron). Electricity is generated due to electric potential difference between two electrodes. This potential difference is created as a result of the difference between individual potentials of the two metal electrodes with respect to the electrolyte.

Although the overall potential of a cell can be measured, there is no simple way to accurately measure the individual electrode/electrolyte potentials in isolation. The electric potential also varies with temperature, concentration and pressure. Since the oxidation potential of a half-reaction is the negative of the reduction potential in a redox reaction, it is sufficient to calculate either one of the potentials. Therefore, standard electrode potential is commonly written as standard reduction potential.

## Calculation of standard electrode potentialsEdit

To overcome the difficulty of measuring individual potential of an electrode, an electrode of unknown reduction potential can be paired with a reference electrode of a known potential. The ultimate reference is the standard hydrogen electrode (SHE) whose potential is defined to be exactly zero volts.

For example, to measure the standard reduction potential of zinc metal electrode, an electrochemical cell can be built with a zinc metal electrode (e.g. a zinc electrode immersed in 1 M ZnSO4 solution) as the anode. The anode half-reaction is then:

Zn(s) → Zn2+(aq,1 M) + 2e-

The SHE is used as the cathode and overall cell can be written in shorthand form:

Zn(s) | Zn2+(aq,1 M) || H+(aq,1 M) | H2(g,1 bar)

Since the reduction half-reaction has a potential of zero, the EMF of the cell, Eocell, corresponds to the potential of the zinc metal electrode because:

Eo</sup>cell(0.76V)= Eo2H+(aq) → H2(g)(0V) + EoZn(s) → Zn2+(aq)(0.76V)

where the superscript o denotes that standard states are employed.

Since the electrode potentials are conventionally defined as reduction potentials, the sign of the potential for the metal electrode being oxidized must be reversed when calculating the overall cell potential. Note that the electrode potentials are independent of the number of electrons transferred and so the two electrode potentials can be simply combined to give the overall cell potential even if different numbers of electrons are involved in the two electrode reactions (more care is required if combining electrode potentials to derive a third electrode potential).

## Standard reduction potential table Edit

Main article: Standard electrode potential (data page)

Since the values are given in their ability to be reduced, the bigger the standard reduction potentials, the easier they are to be reduced, in other words, they are simply better oxidizing agents. For example, F2 has 2.87V and Li+ has -3.05V. F2 reduces easily and is therefore a good oxidizing agent. In contrast, Li+ would rather undergo oxidation (hence a good reducing agent). Thus Zn2+ whose standard reduction potential is -0.76V can be oxidized by any other electrode whose standard reduction potential is greater than -0.76V (eg. H+(0V), Cu2+(0.16V), F2(2.87V)) and can be reduced by any electrode with standard reduction potential less than -0.76V (eg. H2(-2.23V), Na+(-2.71V), Li+(-3.05V)).

In a galvanic cell, where a spontaneous redox reaction drives the cell to produce an electric potential, Gibbs free energy ΔGo must be negative, in accordance with the following equation:

ΔGocell = -nFEocell

where n is number of moles of electrons per mole of products and F is the Faraday constant, ~96,485 C/mol. As such, the following rules apply:

If Eocell> 0, then the process is spontaneous (galvanic cell))
If Eocell< 0, then the process is nonspontaneous (electrolytic cell)

Thus in order to have a spontaneous reaction (-ΔGo), Eocell must be positive, where:

Eo</sup>cell= Eoanode + Eocathode

where Eoanode is the standard potential at the anode (reverse the sign of the standard reduction potential value for the electrode) and Eocathode is the standard potential at the cathode as given in the table of standard electrode potential.

## Non-standard conditionEdit

The standard electrode potentials are measured at standard conditions. Yet in most cases, real cells may operate under non-standard conditions. Given the standard potential of the cell, the non-standard cell potential can be calculated using the Nernst equation:

$E_{cell} = E^0 - \frac{RT}{nF}ln\frac{[red]}{[oxd]}$

## Further reading Edit

• Zumdahl, Steven S.; Zumdahl, Susan A. (2000). Chemistry (5th ed.), Houghton Mifflin Company. ISBN 0-395-98583-8
• Atkins, Peter; Jones, Loretta. (2005). Chemical Principles(3rd ed.), W.H. Freeman and Company. ISBN 0-7167-5701-X
• Yanbing Z, Manon M, Couture, Derrick R, Kolling, Antony R, Lindsay D. Eltis,

James A and Judy Hirst (2003). Biochemistry, 42, 12400-12408

• Shuttleworth, SJ (1820). Electrochemistry (50th ed.), Harper Collins.