Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
Individual differences |
Methods | Statistics | Clinical | Educational | Industrial | Professional items | World psychology |
Biological: Behavioural genetics · Evolutionary psychology · Neuroanatomy · Neurochemistry · Neuroendocrinology · Neuroscience · Psychoneuroimmunology · Physiological Psychology · Psychopharmacology (Index, Outline)
An acid (often represented by the generic formula HA) is traditionally considered any chemical compound that, when dissolved in water, gives a solution with a pH less than 7.0. That approximates the modern definition of Brønsted and Lowry, who defined an acid as a compound which donates a hydrogen ion (H+) to another compound (called a base). A common example is acetic acid (in vinegar) Acid/base systems are different from redox reactions in that there is no change in oxidation state.
- Main article: acid-base reaction theories
- Arrhenius: According to this definition, an acid is a substance that increases the concentration of hydronium ion (H3O+) when dissolved in water, while bases are substances that increase the concentration of hydroxide ions (OH-). This definition limits acids and bases to substances that can dissolve in water. Around 1800, many French chemists, including Antoine Lavoisier, incorrectly believed that all acids contained oxygen. Indeed the modern German word for oxygen is Sauerstoff (lit. sour substance), as is the Afrikaans word for oxygen suurstof, with the same meaning. English chemists, including Sir Humphry Davy at the same time believed all acids contained hydrogen. The Swedish chemist Svante Arrhenius used this belief to develop this definition of acid.
- Brønsted-Lowry: According to this definition, an acid is a proton (hydrogen nucleus) donor and a base is a proton (hydrogen nucleus) acceptor. The acid is said to be dissociated after the proton is donated. An acid and the corresponding base are referred to as conjugate acid-base pairs. Brønsted and Lowry formulated this definition, which includes water-insoluble substances not in the Arrhenius definition.
- Lewis: According to this definition, an acid is an electron-pair acceptor and a base is an electron-pair donor. (These are frequently referred to as "Lewis acids" and "Lewis bases," and are electrophiles and nucleophiles, respectively, in organic chemistry; Lewis bases are also ligands in coordination chemistry.) Lewis acids include substances with no transferable protons (ie H+ hydrogen ions), such as iron(III) chloride, and hence the Lewis definition of an acid has wider application than the Brønsted-Lowry definition. The Lewis definition can also be explained with molecular orbital theory. In general, an acid can receive an electron pair in its lowest unoccupied orbital (LUMO) from the highest occupied orbital (HOMO) of a base. That is, the HOMO from the base and the LUMO from the acid combine to a bonding molecular orbital. This definition was developed by Gilbert N. Lewis.
Although not the most general theory, the Brønsted-Lowry definition is the most widely used definition. The strength of an acid may be understood by this definition by the stability of hydronium and the solvated conjugate base upon dissociation. Increasing stability of the conjugate base will increase the acidity of a compound. This concept of acidity is used frequently for organic acids such as carboxylic acid. The molecular orbital description, where the unfilled proton orbital overlaps with a lone pair, is connected to the Lewis definition.
Generally, acids have the following properties:
- Taste: Acids generally are sour when dissolved in water.
- Touch: Acids produce a stinging feeling, particularly strong acids.
- Reactivity: Acids react aggressively with or corrode most metals.
- Electrical conductivity: Acids, while not normally ionic, are electrolytes.
- Acids turn moist blue litmus paper red
Strong acids and most concentrated acids are dangerous, causing severe burns for even minor contact. Generally, acid burns are treated by rinsing the affected area abundantly with running water (15 minutes) and followed up with immediate medical attention. In the case of highly concentrated acids, the acid should first be wiped off as much as possible, otherwise the reaction of the acid dissolving in the water could cause severe thermal burns. In addition to dangers from the acidity, even dilute solutions of weak acids may also be dangerous, due to toxic or other effects of the ions involved. See an appropriate MSDS for more specific information.
Acids are named according to their anions. That ionic suffix is dropped and replaced with a new suffix (and sometimes prefix), according to the table below. For example, HCl has chloride as its anion, so the -ide suffix makes it take the form hydrochloric acid.
|Anion Prefix||Anion Suffix||Acid Prefix||Acid Suffix||Example|
|per||ate||per||ic acid||perchloric acid (HClO4)|
|ate||ic acid||chloric acid (HClO3)|
|ite||ous acid||chlorous acid (HClO2)|
|hypo||ite||hypo||ous acid||hypochlorous acid (HClO)|
|ide||hydro||ic acid||hydrochloric acid (HCl)|
In water the following equilibrium occurs between a weak acid (HA) and water, which acts as a base:
HA(aq) + H2O ⇌ H3O+(aq) + A-(aq)
The acidity constant (or acid dissociation constant) is the equilibrium constant for the reaction of HA with water:
Strong acids have large Ka values (i.e. the reaction equilibrium lies far to the right; the acid is almost completely dissociated to H3O+ and A-). Strong acids include the heavier hydrohalic acids: hydrochloric acid (HCl), hydrobromic acid (HBr), and hydroiodic acid (HI). (However, hydrofluoric acid, HF, is relatively weak.) For example, the Ka value for hydrochloric acid (HCl) is 107.
Weak acids have small Ka values (i.e. at equilibrium significant amounts of HA and A− exist together in solution; modest levels of H3O+ are present; the acid is only partially dissociated). For example, the Ka value for acetic acid is 1.8 x 10-5. Most organic acids are weak acids. Oxoacids, which tend to contain central atoms in high oxidation states surrounded by oxygen may be quite strong or weak. Nitric acid, sulfuric acid, and perchloric acid are all strong acids, whereas nitrous acid, sulfurous acid and hypochlorous acid are all weak.
Note on terms used:
- The terms "hydrogen ion" and "proton" are used interchangeably; both refer to H+.
- In aqueous solution, the water is protonated to form hydronium ion, H3O+(aq). This is often abbreviated as H+(aq) even though the symbol is not chemically correct.
- The strength of an acid is measured by its acid dissociation constant (Ka) or equivalently its pKa (pKa= - log(Ka)).
- The pH of a solution is a measurement of the concentration of hydronium. This will depend on the concentration and nature of acids and bases in solution.
Polyprotic acids are able to donate more than one proton per acid molecule, in contrast to monoprotic acids that only donate one proton per molecule. Specific types of polyprotic acids have more specific names, such as diprotic acid (two potential protons to donate) and triprotic acid (three potential protons to donate).
A monoprotic acid can undergo one dissociation (sometimes called ionization) as follows and simply has one acid dissociation constant as shown above:
- HA(aq) + H2O(l) ⇌ H3O+(aq) + A−(aq) Ka
A diprotic acid (here symbolized by H2A) can undergo one or two dissociations depending on the pH. Each dissociation has its own dissociation constant, Ka1 and Ka2.
- H2A(aq) + H2O(l) ⇌ H3O+(aq) + HA−(aq) Ka1
- HA−(aq) + H2O(l) ⇌ H3O+(aq) + A2−(aq) Ka2
The first dissociation constant is typically greater than the second; i.e., Ka1 > Ka2 . For example, sulfuric acid (H2SO4) can donate one proton to form the bisulfate anion (HSO4−), for which Ka1 is very large; then it can donate a second proton to form the sulfate anion (SO42−), wherein the Ka2 is intermediate strength. The large Ka1 for the first dissociation makes sulfuric a strong acid. In a similar manner, the weak unstable carbonic acid (H2CO3) can lose one proton to form bicarbonate anion (HCO3−) and lose a second to form carbonate anion (CO32−). Both Ka values are small, but Ka1 > Ka2 .
A triprotic acid (H3A) can undergo one, two, or three dissociations and has three dissociation constants, where Ka1 > Ka2 > Ka3 .
- H3A(aq) + H2O(l) ⇌ H3O+(aq) + H2A−(aq) Ka1
- H2A−(aq) + H2O(l) ⇌ H3O+(aq) + HA2−(aq) Ka2
- HA2−(aq) + H2O(l) ⇌ H3O+(aq) + A3−(aq) Ka3
An inorganic example of a triprotic acid is orthophosphoric acid (H3PO4), usually just called phosphoric acid. All three protons can be successively lost to yield H2PO4−, then HPO42−, and finally PO43− , the orthophosphate ion, usually just called phosphate. An organic example of a triprotic acid is citric acid, which can successively lose three protons to finally form the citrate ion. Even though the positions of the protons on the original molecule may be equivalent, the successive Ka values will differ since it is energetically less favorable to lose a proton if the conjugate base is more negatively charged.
- HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)
Weak acid/weak base equilibriaEdit
- Main article: Henderson-Hasselbalch equation
In order to lose a proton, it is necessary that the pH of the system rise above the pKa of the protonated acid. The decreased concentration of H+ in that basic solution shifts the equilibrium towards the conjugate base form (the deprotonated form of the acid). In lower-pH (more acidic) solutions, there is a high enough H+ concentration in the solution to cause the acid to remain in its protonated form, or to protonate its conjugate base (the deprotonated form).
Solutions of weak acids and salts of their conjugate bases form buffer solutions.
Applications of acids Edit
There are numerous uses for acids. Acids are often used to remove rust and other corrosion from metals in a process known as pickling. They may be used as an electrolyte in a wet cell battery, such sulfuric acid in a car battery. In humans and many other animals, hydrochloric acid is a part of the gastric acid secreted within the stomach to help hydrolyze proteins and polysaccharides, as well as converting the inactive pro-enzyme, pepsinogen into the enzyme, pepsin.
- Listing of strengths of common acids and bases
- Zumdahl, Chemistry, 4th Edition.
See also Edit
- Base (chemistry)
- Amino acids
- Ascorbic acid
- Dihydroxyphenylacetic acid
- Fatty acids
- Homovinillic acid
- Hydroxyindoleacetic acid
- Kainic acid
- Lactic acid
- Lysergic acid diethylamide
- Nicotinic acid
- Nucleic acid
- Uric acid
- Curtipot: Acid-Base equilibria diagrams, pH calculation and titration curves simulation and analysis - freeware
- A summary of the Properties of Acids for the beginning chemistry student
|This page uses Creative Commons Licensed content from Wikipedia (view authors).|